Choose a test user to login and take a site tour.
6 minutes, 17 seconds
-20 Views 0 Comments 0 Likes 0 Reviews
Every RF system needs a way to share one signal with more than one device. A 2-way power divider does that job in a simple and steady way. It takes one input and splits it into two equal outputs. Engineers use it in labs, radar setups, and wireless networks every day.
Flexi RF Inc offers these parts in many sizes and connector types, so you can find one that fits your setup. This article explains how the part works, where you can use it, and what to check before you buy. You will also learn when a 3-way power divider may be a better fit.
Signal power goes in through one port. The divider splits it evenly and sends half to each output port. Because the power is shared, each output is about 3 dB lower than the input. That is normal and expected.
The same part can also work in reverse. If you feed two signals into the output ports, it combines them into one.
● Wilkinson design: Gives high isolation between the output ports. It suits higher power and cleaner signals.
● Resistive design: Works from DC and covers a very wide range. It handles lower power, usually around 1 W.
A divider fits many everyday jobs. Here are some common ones:
● Feeding one signal source to two test instruments
● Sending a signal to two antennas
● Splitting a signal inside a radar system
● Combining two signals into one path
● Setting up phase and amplitude tests in a lab
Join Medium for free to get updates from this writer.
In each case, the goal stays the same. You want both outputs to match as closely as possible.
Picking the right part takes a few quick checks. Flexi RF Inc lists these details on each product page, so they are easy to compare.
Make sure the divider covers the full band you plan to use. Flexi RF Inc offers models from 5 MHz up to 67 GHz. A part used outside its range will not perform well.
Check how much power the divider must handle. Wilkinson models reach 20 W to 30 W. Resistive models are rated at 1 W. Always leave a safe margin.
Match the divider to your cables and devices. Options include SMA, N, TNC, 2.92mm, 2.4mm, and 1.85mm. The right connector saves you from extra adapters and extra loss.
Isolation tells you how well the output ports stay apart. VSWR tells you how much signal bounces back. Look for high isolation and low VSWR. Both help keep your signal clean.
Both outputs should look alike. Good balance matters most in radar, phased arrays, and precise lab tests.
Sometimes two outputs are not enough. If you need to feed three devices from one source, a 3-way power divider is the simple answer. It splits the signal into three equal parts. Each output is about 4.8 dB lower than the input.
You can also build a three-path setup by linking two dividers together. This works, but it adds more parts and more loss. A 3-way power divider keeps the layout tidy and cuts down on joints. If you are unsure which option suits your system, the Flexi RF Inc team can help you decide.
Flexi RF Inc focuses on RF and microwave parts, and it keeps a wide range ready to ship. A few things stand out:
● Same-day shipping on in-stock items
● Experienced RF engineers who answer technical questions
● Many connector types and frequency bands in one place
● Fair pricing, from budget SMA units to high-end millimeter-wave parts
If you need a 2-way power divider for a lab bench or a field system, the company has options for both. You can browse by connector, frequency, or power rating and narrow your list fast.
A good divider keeps your signal clean and your setup simple. Start with your frequency range, power level, and connector type. Then compare isolation and VSWR. Those few checks will point you to the right part.
If you have questions, reach out to the Flexi RF Inc team. They can help you pick a model that fits your project and your budget.
Original Source -
https://medium.com/@flexirfinc1/using-a-2-way-power-divider-in-rf-signal-distribution-1f57b4ea42d1

Share this page with your family and friends.